BINDING EQUIPMENT >> PERFECT BINDING >> ECAMO 730
............................................................................................................................................................................................

• Flexible binding system

• 600 books / hour

• Suction cover feeder

• Built in calculating device that calibrates the scoring and side gluing wheels to the thickness of the book block

The 730 is a professional binder made for short and medium run production and insure high productivity in a minimum of time - 600 books/hour. The integrated calculator detects the thickness of the book to be made and adjust alone the motorised side gluing discs and the motorised scoring wheels.

You only have to introduce the pages in the carriage clamp and the binder set automatically in few seconds. 0% of waste, the 730 can produce books one by one or in a long run. It is made to bring you profits and high quality books. The milling system is made with carbide steel which allows to bind 32 pages signatures. The nipping is pneumatic and the cover is perfectly positioned by less than 1/10mm due to the use of sides, front and rear guides. The cover positioning is set by using the programmable display. The 730 is equipped with a suction cover feeder wich set up automatically by using the programmation display. The scoring device pressure can be adjust easy to provide perfect square back whatever covers thickness are. Cover scoring wheel depth is set up quickly. The 730 is equipped with a 2 drums plus 2 side gluing discs high capacity glue tank also a spinner adjustable in height to enable you to set the level of glue on the spine from 0.5 to 1mm to insure you the highet gluing quality.

Features

Mill

Accurate spine preparation is ensured by a strong mill featuring six notching teeth made of tungsten carbide. The milling height is adjustable. (up to 4mm can be milled off the bookspine). A powerful dust extractor automatically evacuates the paper dust.

Glue tank

The MR 730 features a large glue tank with two glue drums, two side gluing wheels and a scraper that evens the glue layer. The gluing length can also be controlled to avoid glue overflow at the end of the spine.

Pneumati nipping station

Strong and heavy nipping jaws provide the required mechanical force to form perfectly square bookspines. Even high grammaged covers weighting over 400 g/mē or critical cover qualities can be handled. The front and side positioning bars ensure the covers are accurately registered on the nipping station. The nipping height can be adjusted via 2 setscrews.

Suction cover feeder

Large nonstop suction feeder featuring a blower for cover separation. The cover stock position can be fine tuned by means of two setscrews.

Scoring

The cover feeder features two double scoring wheels (of which one is motorized) for cover scoring and two single scoring wheels for eventual flaps. The scoring depth can be adjusted by means of caliper levers.

Exit slide

The books are softly evacuated via an exit slide, thus even sensible cover material is protected from being damaged.

Stacker

A motorized stacker can be connected to the exit belt (optional).

Specifications

* production time depends on operator  ** depending on specification of material